- Security Shutter Ltd.
- Regular price
- Sale price
T-type curtain stoppers can be used with a manual roll shutter only. These curtain stoppers allow for maximum clear opening height, quick installation and service access.
Rotate the T at a 45-degree angle before inserting the curtain past the entry guides and into the guide rails. Installs within the end slat and is adjustable for various end slat sizes. 1/2" thickness. T width in locked position is 1.45" (36.8mm)
T-type curtain stoppers do the important job of stopping the rolling shutter curtain from coiling too far inside the box assembly of the shutter. These are only meant for small and lightweight rolling shutters. Below is a list of operation types these stoppers can be used for. These stoppers should only be used for the Protect Series (soft-foam-filled) shutter system.
- Manual Counter Balance Spring operated rolling shutters
- Manual Tape Pulley-operated rolling shutters
- Manual Tape Winder-operated rolling shutters
- Manual Crank-Gear Assist operated rolling shutters
Please note: These stops should not be installed on motorized applications, and can cause damage or harm to operators if this is done.
Motorized shutters have the option to either program the UPPER and LOWER limits with remote (on remote motors), or mechanical (on motor) limit-setting capabilities.
Essentially these T-type curtain stoppers act as the UPPER limits on a manual rolling shutter. If not installed you can damage the rolling shutter.
Thank you for choosing Security Shutter Ltd. (SSL). We appreciate your attention and hope this information helps you make the right choice! Don't hesitate to reach out if there is anything else you need, we would a-DOOR to work with you.
- The SSL Team
1-866-765-5366 or https://securityshutter.ca
5940 Macleod Trails SW, Suite #500 - Calgary, AB T2H 2G4